STRUCTURE (1. figure)
1.
angular compactor
2.
grinder head
3.
fixer ring
4.
slicer inset
5.
apple greater inset
6.
walnut grinder inset
INSTALLATION, USE
1.
Thoroughly rinse the accessories of the set with kitchen detergent, then rinse with clean water and wipe dry.
2.
Place the grinder on a solid, horizontal surface.
3.
The fan of the motor unit cools the motor by ensuring free air flow under and near the motor.
4.
Make sure the machine’s switch is in 0, switched off state, and the power plug is pulled out of from the network!
5.
Assemble the device in the order shown in
figure 2
:
1. Hold pressed the lock button, and by holding the grinder head rotated, insert it to the motor’s shaft coupling.
2. Release the lock button, and rotate the grinder head to vertical position, until the lock button don’t click to its place. Check if the
grinder head fits snugly into its place.
3. Select the slicer, the apple greater or the walnut grinder inset, and place it into the grinder head.
4. Fix the selected inset with the fixer ring.
5. Push the material to be sliced, grinded to the grinder head with the compactor.
6.
Connect the appliance to a standard, grounded wall outlet.
7.
Start the meat grinder by switching the switch to ON position.
CLEANING, MAINTENANCE
1. Clean the appliance after each use!
2. Before cleaning, switch off the appliance and disconnect it from the power supply.
3. Disassemble the device in the reverse order of the assembly (2. figure).
4. Clean the outside of the appliance with a slightly damp cloth. Do not use aggressive cleaning agents! Avoid getting water inside of and
on the electric components of the appliance! It is forbidden to immerse the motor unit in water!
5. Thoroughly wash the accessories removed from the motor unit with detergent, then rinse with clean water and wipe dry.
Waste equipment must be collected and disposed separately from household waste because it may contain components
hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale,
or at any distributor which sells equipment of identical nature and function. Dispose of the product at a facility specializing in
the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself.
If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the
manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
SPECIFICATIONS
dimensions: . . . . . . . . . . . . . 90 mm x 105 mm x 220 mm
