4
28.
The appliance may only be connected to properly grounded 230V~/50Hz electric wall outlets!
29.
Do not use extension cords or power strips to connect the unit!
30.
Do not lead the power cable over the appliance!
31.
Do not lead the power cable under carpets, doormats, etc.!
32.
The appliance should be located so as to allow easy access and removal of the power plug!
33.
Lead the power cable so as to prevent it from being pulled out accidentally or tripped over!
34.
The unit is intended for household use. No industrial use is permitted!
35.
The actual instruction manual can be downloaded from www.somogyi.hu
website.
36. We don’t take the responsibility for printing errors and apologize if there’s any.
37.
The unit is intended for household use. No industrial use is permitted!
CAUTION: RISK OF ELECTRIC SHOCK!
Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged,
immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the
manufacturer, its service facility or similarly qualified personnel.
ASSEMBLY AND INSTALLATION OF THE UNIT
1. Before switching on for the first time, carefully remove the packaging material taking care not to damage the
appliance and power cable. Do not use the product if it is damaged in any way!
2. The device can be used free-standing or mounted on wall.
3. For proper operation, the free circulation of warm air must be ensured, so select the place of the
wall- mounting according to
Figure 2.
! It is forbidden to locate the unit directly under a wall outlet!
4. FOR MOUNTING ON WALL:
- Fix two-two consoles to the second and fifth towel-dryer rod from the top with the enclosed cups, and two-two
pcs screws by each. Use an at least 10 cm long, magnetic- and cross-headed screwdriver.
- Fit the product to the wall and mark the location of the dowels, making sure that the bottom towel bar of the
wall mounted appliance is at least 600 mm away from the floor.
- Make the holes for the dowels on the wall.
- Attach the appliance to the wall by screwing it up.
- Make sure the device is stable on the wall!
- Connect the unit to a standard grounded wall outlet.
- Now the unit is ready for use.
5. FREE-STANDING:
- Attach the supplied soles with two screws per piece to the bottom of the product’s columns.
- Set the product up on its soles.
- Make sure that the product stays stable on its soles
- Connect the unit to a standard grounded wall outlet.
- Now the unit is ready for use.
CLEANING
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the
manner of use and degree of contamination.
1. Switch off and power off the unit by unplugging it from the electric outlet before cleaning!
2. Allow the appliance to cool (for at least 30 minutes).
3. Use a slightly moistened cloth to clean the unit’s outer surface. Do not use any aggressive cleaners. Avoid
getting water inside of and on the electric components of the appliance!