The appliance must not be operated if damaged in any way.
2. Take out the appliance from the box.
3. For proper operation, the free flow of hot air has to be ensured, so observe the minimum placement distances shown in
Figure 2.
4. When selecting the location of the appliance, please take into consideration, that the appliance can only be operated in
WiFi environment, using the free smartphone application.
5. Using the distances shown in
Figure 3.
, drill holes into the wall that correspond to the dowels supplied or planned to be
used.
6. Insert the dowels into the holes, then screw in the screws supplied or planned to be used, so that the screw heads stick
out approx. 10 mm form the plane of the wall.
7. Align the holes on the back of the device on the screws, then slide the device to the left and lower it. Make sure that the
heater is stable on the wall. ATTENTION! The appliance can only be mounted on the wall with its arrow on the top pointing
towards the ceiling.
8. The switch of the appliance must be in OFF position.
9. Connect the appliance into a standard ground wall outlet. Now the appliance is ready for operation.
Do not cover! Covering the unit can cause overheating, fire or electric shock!
Caution: Risk of electric shock!
Do not attempt to disassemble or modify the unit or its accessories. In case any part is damaged, immediately
power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its
service facility or similarly qualified personnel.
FEATURES
electronic infra heater, for heating the air of indoor premises ● can only be controlled with smartphone application ● 350 W output ● electronic thermos
-
tat ● weekly program ● wall mountable design ● automatic switch off in case of overheating
STRUCTURE (Figure 1.)
Figure 1.
1. main switch
2. WIFI reset
OPERATION
The appliance can only be operated using the free smartphone application.
After powering up the heater and switching the main switch (1) on, the appliance not connected yet to the WIFI network and the smartphone starts
operating with 25 °C thermostat value.
By the time of the first switch on following a power off or disconnecting the WIFI network, the appliance also operates with 25 °C thermostat value.
The mobile phone must be connected to the Internet.
1. Scan the QR code with your phone (Figure 4.), then download and install the „Tuya Smart” application.
2. Select the country code and enter your mobile phone number, then press the „Get” button.
3. Enter the („verification code”) you received in SMS, and enter the password you want to use for the application containing numbers and letters.
4. Enter the application: „Login”
5. Make sure that your device and smartphone are as close as possible and connected to the WIFI router.
6. Press the „+” button to add the new appliance to the program.
• Select the type of the appliance: „Small home appliances”
→
„Heating (other)”.
• Press the „Configure Gateway” button.
• Press and hold the appliance’s WIFI reset button for more than 5 seconds, until the beep sound.
• If the indicator on your appliance is blinking rapidly, press the „Confirm indicator rapidly blinks” button.
• Enter the password of the WIFI network you want to use on your appliance, then press the „Confirm” button.
• Your mobile phone connects the appliance to the cloud-based network.
7. If the connection according to point 6 was unsuccessful, „Failed to add” appears on the display.
• Select „Switch Pairing Mode” option at the bottom.
• If the appliance’s indicator blinks slowly, select the „Confirm indicator slowly blinks” button.
• Enter the password of the WIFI network you want to use on your appliance, then press the „Confirm” button.
• Press the „Go to Connect” button, then select the SmartLife-XXXX network among the WLAN networks on your phone. If the state is “connected”,
then press the back button of the phone.
• The „Connecting now” screen runs and the appliance gets connected to the cloud-based network.
8. In the application, you can see the temperature of the room, you can switch ON/OFF the appliance and you can set the exact time and date(s) when
you want the appliance to switch ON/OFF.
If the ambient temperature decreases 1 °C below the set value, then the appliance switches on. If the ambient temperature is higher than the set value
with 1 °C, the appliance switches off.
