25
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
WALL MOUNTED FAN HEATER
FEATURES
wall mounted PTC* fan heather for heating the air of indoor premises ● adjustable output (1000 / 2000 W) ● operation modes: warm,
hot air ● switchable air deflection ● built-in thermostat ● overheating protection ● 12-hour switch off timing ● weekly program ●
temperature display ● touch buttons ● with remote control
OPERATION
The device can be operated with the touch buttons on it or with the remote control.
General use
After connecting the appliance to the mains, switch it on with its main switch (2). Then it beeps briefly, the display shows the room
temperature in °C.
You can select heating stage with the appliance’s or the remote control’s ON/OFF Heat button. Low heating stage is indicated with [
],
while high heating stage is indicated with [
] on the display (14). Besides the selected heating stage, the operation of the device is
independent from the thermostat.
You can switch on/off continuous air deflection with the appliance’s or the remote control’s Swing button. The function is only available
when the appliance is heating. If the function is active, its indicator is shown on the display. The function is not available during weekly
program operation.
Use the Timer button on the appliance or the remote control to set switch off timing, up to 12 hours, in whole hours. You can switch
off this function by setting 0 hour. The function is only available when the appliance is heating. If the function is active, the set value is
visible on the display. The feature is not available during weekly program operation.
Use the Temp button on the device or the remote control to set the thermostat temperature between 18 – 45 °C. To use this function,
you must firstly select the heating stage with the appliance’s or the remote control’s ON/OFF Heat button. If the room temperature falls
below 2 °C lower than the set temperature, the appliance switches on. If the room temperature rises towards 2 °C higher than the set
temperature, then heating and the fan switch off. In some cases, the fan is still running for 15 seconds without heating, then it stops. If
the appliance switches off during thermostat operation, the air deflector blade does not close. If continuous air deflection is switched on
on the appliance, then this function also deactivates until the room temperature drops below the set value again, and until the appliance
starts to heat again. The indication of heating stage, continuous air deflection and the switch off timer remain visible on the screen, if
the appliance switches off during thermostat operation.
When we choose 00 °C as the set temperature, it exits the thermostat mode.
After switching off the appliance, it may still operate in fan mode for about 15 seconds. Do not power off the appliance until it switches
off, because it may cause damage to the appliance.
Weekly program
With the remote control of the appliance, you can set switch on time for every days of the week, the duration of operation and the daily
thermostat values.
You can access this function by using the remote control’s Set button, when the appliance is ready for operation, but no other functions
are active. After pressing the Set button, you have to always check the time and date on your device. During setting the exact time and
day, use the remote control’s [ ] button to select the values by character, then you can move to the other character with the OK button.
Use the Cancel button on the remote control to return to the previous character. After setting the exact time, press the OK button. Set
the actual date with the help of the [ ] button.
MO
TU
WE
TH
FR
SA
SU
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
After setting the current day, press OK again. On the display you can set the switch on time belonging to that day, by character, also with
the help of the [ ], OK and Cancel buttons. After you have set the power on time, after pressing the OK button, you have the option
to set maximum 12-hour period for operation. If you set 0 hour, the appliance does not perform a scheduled program that day. If you
have set the operating time, after pressing the OK button you can set the thermostat temperature for that day using the [ ] buttons.
After pressing the OK button, you can set the OK button, you can set the starting time, operating time and temperature for the next day
of the week. After setting the desired parameters for each day of the week, after pressing the OK button, the display shows the exact
time and day, the weekly program function is active.
Regardless to the weekly program, you have the option of switching the heating stages on/off at any time, selecting thermostat
operation, continuous air deflection during operation and setting switch off time, using any function pauses the set weekly program.
If you switch off these functions, the exact time and day can be read on the display again, then the weekly program is active again.
