SETUP AND FUNCTION
Page 12
4
Setup and function
The machine crushes various cereals (oats, barley, wheat, corn, spelt, etc.). The operator fills the material to be
crushed into the feed hopper (3). From there, it flows in a metered manner onto the two powered pinch rollers
which crush the material between them. The crushing force depends on the size of the material to be crushed
relative to the gap set between the pinch rollers. The crushed end product drops out of the outlet opening on the
underside of the machine.
Pos.
Description
Function
1
Electronics cabinet
Houses the main switch with motor protection switch, ammeter with load
and overload indicator and plug.
2
Drive motor
Drives the machine
3
Hopper
Receives the material to be crushed and feeds it to the pinch rollers.
4
Feed control
Sets the feed gap in the hopper.
5
Outlet angle bracket frame
Holds the catchment sacks. Outlet for crushed grain.
6
Type plate
Shows the machine data.
7
Foreign body ejector
Removes foreign bodies from the pinch rollers.
8
Crushing gap adjustment
Sets the width of the crushing gap between the pinch rollers.
9
Suspension brackets
Attach the machine to the holder (wall hanger bracket, stand).
10
Wall hanger bracket
Holds the machine
11*
Protective grille
Protects against reaching in.
a
Main switch
Switches the machine on/off
b
Ammeter
Shows the machine load.
*Not shown in the figure.
5
1
2
4
3
6
7
8
9
10
a
b
11
11
11
11
