SOMFY Sunea Screen 40 io, Инструкция по эксплуатации

Страница: 31 / 104

31
EN
Copyright © 2016 Somfy SAS. All rights reserved.
Images not contractually binding
3.5.2. Deleting the favourite position (my)
1) Press
my
: the motorised product starts to move, and stops in the favourite
position (my).
2) Press
my
again until the motorised product moves: the favourite position (my)
is deleted.
3.5.3. Adding/Deleting Somfy control points and sensors
Refer to the corresponding instructions.
4. TECHNICAL DATA
Power supply 230 V 50 Hz
Radio frequency 868-870 MHz io homecontrol®, two-way Tri-band
Frequency bands and maximum power used
868.000 MHz - 868.600 MHz e.r.p. <25 mW
868.700 MHz - 869.200 MHz e.r.p. <25 mW
869.700 MHz - 870.000 MHz e.r.p < 25 mW
Operating temperature - 20°C to + 60°C
Protection rating IP 44
Safety level Category II
Maximum number of associated control points and sensors 9
As the manufacturer, Somfy SAS, F-74300 CLUSES hereby declares that the drive covered by these instructions, when
marked for input voltage 230V~50Hz and used as intended according to these instructions, is in compliance with the
essential requirements of the applicable European Directives, in particular the Machinery Directive 2006/42/EC and the
Radio Directive 2014/53/EU.
The full text of the Declaration of EU Conformity is available at www.somfy.com/ce.
Christian Rey, Head of Certifi cation, on behalf of the Activity Director, Cluses, 03/2016.
3.6. TIPS AND RECOMMENDATIONS FOR USE
3.6.1. Questions about the Sunea Screen?
If the motorised product still does not work, contact a drive and home automation professional.
3.6.4. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a drive and home automation professional.
Observations Possible causes Solutions
The motorised product does
not operate.
The control point battery is low. Check whether the battery is low and replace it if necessary.
The overheating protection on the drive has been
activated.
Wait for the drive to cool down.
1
2