SOMFY Sunea Screen 40 io, Инструкция по эксплуатации

Страница: 27 / 104

27
EN
Copyright © 2016 Somfy SAS. All rights reserved.
Images not contractually binding
Limit position setting in semi-automatic mode
For awnings with upper stop (load bar stopped under the head rail), the upper end limit is adjusted automatically, while the lower end
limit must be adjusted manually.
Setting the upper automatic and lower manual end limits.
1) Lower the motorised product to the desired position by pressing the
V
button.
2) Press the my and Λ buttons simultaneously until the motorised product rises;
the lower end limit has been set.
3) Press the "
my
" button to stop the motorised product.
4) To confirm the end limits, press the
my
button until the motorised product
moves up and down.
2.3.4. Programming the control point
The drive is in programming mode:
Quickly press the PROG button on the control point to be programmed:
The motorised product moves up and down: this control point is programmed in
the drive.
If the drive is no longer in programming mode, repeat Step 2.3.1
before performing Step 2.3.4.
2.3.5. Re-setting the end limits (for end limits set manually)
Readjusting the upper end limit
1) Press the
Λ
button to bring the motorised product to the end limit to be
readjusted.
2) Press the
Λ
and
V
buttons at the same time until the motorised product moves
up and down.
3) Press the
Λ
or
V
button to move the motorised product to the new desired
position.
4) To confirm the new end limit, press the
my
button until the motorised product
moves up and down.
Readjusting the lower end limit
1) Press the
V
button to bring the motorised product to the end limit to be
readjusted.
2) Press the
Λ
and
V
buttons at the same time until the motorised product moves
up and down.
3) Press the
Λ
or
V
button to move the motorised product to the new desired
position.
4) To confirm the new end limit, press the
my button until the motorised product
moves up and down.
1 2
3
4
1 2
3
4
1 2
3
4
PROG.