SOMFY Sonesse 40 RTS, Руководство пользователя

Страница: 14 / 64

14 Copyright © 2011-2016 Somfy Activités SA. All rights reserved Copyright © 2011-2016 Somfy Activités SA,. All rights reserved
EN
PROG.
A
A
C
B
MY
X 2
6.8 Adding/Deleting RTS sensors
Find an RTS transmitter programmed in the
motor.
Press and hold the RTS programmed
transmitter (A) PROG button until the shade jogs:
the motor is in programming mode.
Press briefly the RTS sensor (C) PROG button to
add or delete this sensor: the shade jogs and the
RTS sensor is programmed or deleted from the
motor.
6.9 Erase the memory of the motor.
N.B.: This reset deletes all RTS transmitters,
RTS sensors, end-limits and intermediate posi-
tion programmed.
N.B.: Only switch off the current for the motor
to be reset!
N.B.: Before cutting the power, move the shade
to the middle position.
1) Cut the power supply for 2 seconds.
2) Switch the power supply back on for 10 to 15
seconds.
3) Cut the power supply for 2 seconds.
4) Switch the power supply back on: the shade
moves during 5 seconds (If the shade position
is an end limit, the behavior of the shade will be
a jog).
5) Press the RTS transmitter (A) PROG button
until the shade jogs twice: all the RTS transmit-
ters, RTS sensors, end-limits and intermediate
position are cleared.
2 sec
10 to 15
sec
2 sec
PROG.
A
PROG.
B
C
PROG.
C
A
B
A
A
A
B B
C
C
PROG.
A
PROG.
B
A
A
A
A
PROG.
A
PROG.
C
PROG.
A
+
-
2
4
3
1
5
5064823B Sonesse 40 RTS.indb 14 11/03/2019 13:58