Sonesse 30 Programming & Operation Instructions
STEP FOUR
Setting Limits (Shade Positions)
1.
2.
my
Press & hold MY (stop)
Button
3.
4.
my
Press & hold MY (stop)
and UP Button
my
Press & hold MY (stop)
and DOWN Button
Starting with shade in down position.
4) Once desired upper limit (shade position) is reached, press and
hold the
MY (stop)
and
DOWN uttons
simultaneously until the
shade begins to move down, then release.
b
3) Press the
MY (stop) utton
when the shade reaches the desired
upper limit (shade position). If necessary, adjust the desired
shade position with a brief press of either the
UP or DOWN utton
.
b
b
2 ) Once the desired lower limit (shade position) is reached, press and hold
the
MY (stop)
and
UP uttons
simultaneously until the
shade begins to move up, then release.
b
my
Press &
hold UP
or
DOWN
Button
my
Press &
hold DOWN
Button
Press &
hold UP
Button
Check Polarity (Shade direction) MUST BE DETERMINED BEFORE SETTING SHADE LIMITS
STEP THREE
my
my
Press and hold the
DOWN
utton
and confirm the shade moves down.
Press and hold the
UP utton
and confirm the shade moves up.
·If shade direction is correct, continue to
Step 4.
·If shade direction is not correct (in reverse), press and hold the
MY (stop) utton
on the transmitter for 2 seconds. Shade will jog.
Shade direction is now corrected. Shade movement should now
correspond to the direction button on the transmitter.
b
b
b
TM
1) Press and hold the
UP or DOWN utton
on the transmitter to
reach the desired lower limit (shade position).
b
P.2
Solar Control, LLC | 888-550-4836
SolarControlLLC.com
