background image

Sonesse 28 WF RTS

EN

Copyright

©

 2020 SOMFY ACTIVITES SA. All rights reserved.

15

3.3.Controlling Up, Down, My: in Tilting mode

1]

To  move  the  motorised  product  from  a
limit  to  the  other  limit,  briefly  press  (less
than 0,5s) the 

Up

 or 

Down

 button.

2]

To stop the motorised product, press the

My

 button.

3]

(If a My position is recorded) To move the
motorised  product  to  the  My  position,
briefly  press  the 

My

  button.  The

motorised  product  automatically  travels
to the down end limit (first) then to the My
position.

4]

To tilt the slats, press and hold the 

Up

 or

Down

  button  or  use  the  scroll  of  the

remote  control,  until  the  slats  reach  the
desired position.

1]

2]

4]

3]

3.4.Favourite position (my)

NOTICE

An  intermediate  stop,  which  is  called  the  “favourite  (my)  position”,  is  different
from the upper and lower positions.

1]

To set this function, move the motorised
product  to  the  desired  position  using  the

Up

 or 

Down

 button.

2]

Briefly  press 

My

  button  to  stop  the

motorised product.

3]

Press  and  hold  the 

My

  button  until  the

motorised product moves up and down.

g

Favourite  (my)  position  is  set  and

green LED blinks 5 times.

1]

2]

3]

Содержание Sonesse 28 WF Zigbee

























Отзывы: