SOMFY Sonesse 28 WF Zigbee, Инструкция по эксплуатации

Страница: 10 / 24

EN Sonesse 28 WF RTS
10 Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
Observations Possible causes Solutions
Proceed to Recording
“Pairing” the control
point [
}
8] ;
Disconnect and reconnect
the battery.
The motorised product
stops too soon. The end limits are
incorrectly set. Reset the end limits.
The motorised product has
exceeded recommended
weight limit. Replace the motorised
product.
Battery is low. Charge the battery.
Setting is not allowed. The
drive moves briefly 3 times
in one direction and 3 times
in the other direction. Red
LED blinks 3 times and 3
times intermittently. Maximum number of
control points reached. Erase control points from
memory to add a new
control point referring to
Erasing control points
from memory [
}
12]
Maximum/minimum value
of the setting is reached. Perform correct setting.
End limits are too close Readjust the end limits
referring to
Readjusting
the end limits [ } 10] .
2.4.2.Readjusting the end limits
CAUTION
Control point must be paired to the motorised product.
NOTICE
Orange LED blinks slowly until the new end limit is recorded.