SOMFY Oximo WT, Инструкция по эксплуатации

Страница: 48 / 120

46 Non contractual images Copyright © 2005 - 2014 Somfy SAS. All rights reserved.
EN
2. 4. 2. Re-setting the end limits
1
k ) $ "%! % #; )
# ]Z)$]$ ;
8] ) # #ZZ
and whether or not there are stops on the end slat.
2. 4. 2. 1. With locks and with stops on the end slat
š ; Z
{# ))
œ‚ ) )) œ
2. 4. 2. 2. With locks and without stops on the end slat
š ; Z;
$
Re-setting the upper end limit
{ $ ;
activation of the control point and the reaction by the
application.
1)
Place the roller shutter at its upper end limit.
2)
J œkœ$ # !
3)
Wait for 2 seconds.
4)
J œkœ $
$Z#
5)
Repeat steps 3 and 4 four times.
@
The last back and forth movement is brief.
6)
Place the roller shutter in the desired upper end
limit position.
7)
ž” œ„;œ$
{# &
8)
Wait for 2 seconds.
J œ„;œ$
$Z#
~
The new upper end limit position is programmed.
2. 4. 2. 3. YJX‚
š ; ”$Z
; ; $
Re-setting the lower end limit
{ $ ;
activation of the control point and the reaction by the
application.
1)
Place the roller shutter at its lower end limit.
2)
J œ„;œ$ # !
3)
Wait for 2 seconds.
4)
J œ„;œ$
$Z#
5)
Repeat steps 3 and 4 four times.
@
The last back and forth movement is brief.
6)
Place the roller shutter in the desired lower end
limit position.
7)
ž” œkœ$
{# &
8)
Wait for 2 seconds.
J œkœ $
$Z#
~
The new lower end limit position is programmed.
3)
5)
7)
9)
1) 2)
4)
6)
8)
0.5 s
5 s
[Step 3
+
Step 4]
X
2 s
2 s
2) 3)
5)
7)
9)
1)
4)
6)
8)
0.5 s
5 s
[Step 3
+
Step 4]
X
2 s
2 s