SOMFY Oximo WireFree Battery Stick, Инструкция по эксплуатации

Страница: 6 / 52

6
EN
Copyright © 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
Oximo WireFree
TM
Battery Stick
2.1.2. Adhesive-mounting
͉
͉
Somfy does not recommend adhesive-mounting the battery, especially on non-smooth and porous surfaces such as plastering,
concrete or wood.
͉
͉
The ambient temperature when applying the adhesive must be between 20°C and 38°C.
͉
͉
Thoroughly clean the chosen mounting locations with an isopropyl alcohol and water mixture (50/50) based solvent or with a
heptane based solvent.
1) Select one of the two fl at surfaces on which to stick the adhesive in
accordance with the confi guration of your installation.
2) Remove the protective paper from the adhesive and stick it to the fl at surface
of the battery selected.
3) Remove the other protective paper from the adhesive and press the battery
onto the cleaned surface using even force.
Go to section
2.2. Wiring
.
2.2. WIRING
Warning
Never cause a short circuit across the battery terminals. Risk of burns and explosion.
Attention
• Do not cut or modify the cable.
• The connections with the motor must be inside the roller shutter housing.
• A cable crossing a metallic wall must be protected and insulated by means of the cable grommet supplied on the
cable.
• Attach cables to prevent any contact with moving parts.
• Somfy recommends placing the connectors between the end piece and fl ange and fi xing the cables inside the roller
shutter housing.
Wire the 2-pin battery connector (A) to the 2-pin Y-shaped cable connector (B).
2)
1)
3)
B A