A.
Motor direction MUST be verified before any transmitters or functions are programmed.
B.
To enter programming mode, first ensure the window treatment is not at the upper limit. Press the UP and DOWN
buttons on a Telis Transmitter or similar device. The motor will jog.
C.
After entering programming mode, The UP button of the transmitter will be pressed a number of times followed by
the STOP button, dependent on the function. The motor will jog each time the UP button is pressed. Below is a
summary of the number of UP key presses and the corresponding function.
D.
A Memory Clear can be performed by pressing the Programming Button on the Plug-In Unit or via the transmitter.
MULTILINK PLUG-IN
Quick Reference Guide
Enter Intermediate Position Setup
Disable or Enable Tilt Function
Erase all programmed functions and memorized transmitters
Disable or Enable Intermediate Position
Set Run Time
1
3
4
6
7
FUNCTION
UP KEY
PRESSES
Enabled
Enabled
2 Minutes
DEFAULT
VALUE
EXAMPLE:
To disable the tilt function, the following buttons should be pressed:
A). <UP> + <DOWN> wait for jog
B). <UP> <UP> <UP> <STOP>
TI N
B Y
