SOMFY Maestria WT, Руководство пользователя

Страница: 7 / 18

7
Maestria WT
Setting 3: Setting of 2 automatic end limits
After the setting, the bottom bar will compensate the fabric lengthening every 30 cycles. After 180
cycles, this frequency will change to every 90 cycles. A cable with a shunt (WT) switch is needed for
setting a WT motor. This switch allows powering both directions simultaneously and it is needed to
start and stop the setting process.
Setting the Maestria WT motor
1 Connect the motor using a setting cable
2 Check the rotation direction
3 Adjust the rotation direction (cut first the power to the motor)
4 Activate the setting mode
RTS
WT
RTS
WT
RTS
WT
OK

4

Not OK

3
Switch the brown and the black wires.
Push the WT button
until...
...short up and down
movement
3 s
RTS
WT
230V AC
Motor reacts
after +/- 1 s
Remark:
Keep the button(s) pushed until
the end of the second movement.
Earth Earth
Neutral Neutral