3
Maestria WT
Setting 1: Setting of 2 fixed end limits
A cable with a shunt (WT) switch is needed for setting a WT motor.
This switch allows powering both directions simultaneously and it is needed to start and stop the
setting process.
1 Connect the motor using a setting cable
2 Check the rotation direction
3 Adjust the rotation direction (cut first the power to the motor)
4 Activate the setting mode
RTS
WT
RTS
WT
RTS
WT
OK
4
Not OK
3
Switch the brown and the black wires
Earth
Earth
Neutral
Neutral
Push the WT button
until...
...a short up and down
movement
RTS
WT
230V AC
Motor
reacts after
+/- 1 s
Setting the Maestria WT motor
Remark:
Keep the button(s) pushed until
the end of the second movement
Содержание Maestria WT
Страница 1: ...Manual Maestria WT motor...