4
R
The Blind won’t move
1- Check the battery level of the transmitter.
2- Check the low voltage feed of the IRS 300 (inversion between the + and -).
3- Check if there is a bright light shining on the receiver.
4- Check that you are within the infrared transmission range.
5- Check that you are aiming the transmitter at the receiver correctly.
Up and Down is
reversed when
operating with the
transmitter.
1- Check the motor wiring.
PROG.
1
➟
8
1
➟
4
5
➟
8
®
1
2
3
4
5
6
2
4
6
Enter the
programming mode.
The blind starts
tilting up & down.
Press the 3 button. Let
the blind rise to the full
up position. Press the
down button, (the blind
goes down).
Press the stop button
as soon as the down
position is reached.
How to set the automatic opening of the slats in the down position
:
d
>
>
>
2
4
6
8
2
4
To change this setting
once it is programmed :
Press the
« down »
button. The blind moves
to the down position.
Press and hold the
«
up »
button until the
desired opening is
reached.
>
>
Press the button
to confirm.
The blind starts tilting up
& down quickly again.
Proceed with another
setting for this blind or
exit the programming
mode.
5..8
2
4
Press and hold the
«
up »
button until the
desired opening is
reached.
How to re-program the
automatic opening of the
slats in the down
position.
Press the
« prog »
button and start the
operation again.
PROG.
1
➟
8
1
➟
4
5
➟
8
®
1
2
3
4
1
2
3
4
5
6
Enter the
programming mode.
The blind starts
tilting up & down.
Press the 2 button.
The blind stops tilting.
Press the 1 button. The
blind starts tilting up &
down quickly again.
How to cancel the tilting function? - (Roller - Pleated - Cellular Blind Types).
e
>
>
>
PROG.
1
➟
8
1
➟
4
5
➟
8
®
Press the
« prog »
button to exit the
p r o g r a m m i n g
mode.
Up and Down is
reversed when
operating with the
impulse type switch.
1- Check the motor wiring.
2- Check the impulse switch wiring.
3- Check the switch wiring on the input connector of the IRS 300.
Manfunctions :
