Installation guide
9
Copyright © 2010 - 2011 Somfy SAS. All rights reserved.
Sunis indoor WireFree™ RTS
EN
If the red/green LED is lit permanently, then demonstration mode is
deactivated.
T`T^}T^`T}T¬^xTxT}xx}T`^TT_}xTT}_^x^T
mode then the sensor automatically switches to operating mode.
aaFjfeeldFeifFgkdtlieFeinfgictm
To increase the sunlight threshold, turn the potentiometer setting
toward the (+). To decrease the sunlight threshold, turn the
potentiometer setting toward the (-).
To adjust the threshold according to the
sunlight intensity of the moment, follow the
steps below:
1) Slide the (OFF/
) selector switch to
.
2) »}¼aT }xxT }T ½Ä^}´T ¬^ÀT }T ÅƵT
glows green or red.
´TTurn the potentiometer up to the (+) position:
the LED glows red.
4) Slowly turn the potentiometer towards the
(-) position until the LED changes from red
to green: the sunlight threshold is set on the
basis of the current intensity.
+
