Installation guide
8
Copyright © 2010 - 2011 Somfy SAS. All rights reserved.
Sunis indoor WireFree™ RTS
EN
5.5. (Mode) button
T»}¼aT}xxT}T½Ä^}´T¬^T^Tz}T`^_^T_^}q
Press and hold the (Mode) button to activate demonstration mode.
5.5.1. Information mode
ºT»}¼aT}xxT}T½Ä^}´T¬^T^TT^T}TxxT^`T}Tx}x^q
`T}TÅƵT½}o}}´T¼x}xÀT}Tx}x^TxTT}_^x^T_^}q
If the LED (red/green) is permanently lit: the sensor is in operating mode.
If the LED is red: the level of sunlight intensity is lower than the set
sunlight threshold.
If the LED is green: the level of sunlight intensity is greater than the
set sunlight threshold.
aa~aFfcdgenselcdFcmf
¢}T }aT x^T }x^x}T _}xT T }_^x^T _^}T _°}T T
^xx¬¨}T^Tz}z°T}Tx¨¨^q
Do not change the sunlight threshold setting in demonstration
mode.
The same procedure is used to activate or deactivate
demonstration mode.
- Press and hold (>2 sec.) the (Mode) button to
activate or deactivate demonstration mode.
`T }T }o}}T ÅƵT ¼x}xT `^T T `}tT
x}z^xT ½ÈT x}zq´T }T }_^x^T _^}T
is activated.
> 2 s
