CT-32RT-12V
CordLift WireFree Programming & Operation Instructions
TM
STEP FOUR
Setting Limits (Shade Positions)
1.
2.
my
Press MY (stop)
Button
3.
4.
my
5.
Press MY (stop)
Button for 2 seconds
my
Press MY (stop)
and UP Button
my
Press MY (stop)
and DOWN Button
Starting with shade in down position.
1) Press and hold the
UP or DOWN button
on the transmitter to
reach the desired lower limit (shade position).
4) Once desired upper limit (shade position) is reached, press and
hold the
MY (Stop)
and
DOWN buttons
simultaneously until the
shade begins to move, then release.
3) Press the
MY (Stop) button
when the shade reaches the desired
upper limit (shade position). If necessary, adjust the desired
shade position with a brief press of either the
UP or DOWN button
.
2 ) Once the desired lower limit (shade position) is reached, press and hold
the
MY (Stop)
and
UP buttons
simultaneously until the
shade begins to move, then release.
1.
2.
Starting with shade in up position
1) Press and hold the
DOWN or UP button
on the transmitter to
reach the desired upper limit (shade position).
2) Once the desired upper limit (shade position) is reached, press and hold
the
MY (Stop)
and
DOWN buttons
simultaneously until the
shade begins to move, then release.
my
Press &
hold UP
or
DOWN
Button
my
Press and
hold UP
or
DOWN Button
my
my
Press MY (stop)
and DOWN Button
5)
Once shade stops at previously set lower limit (shade position), press the
MY (stop) button
for 2 seconds until the shade jogs. This confirms both
limits (shade positions).
To complete programming, proceed to STEP FIVE
