1
Put the arms into the closing position
7
5
Assembly process
The wings are in the closed
position, against the
central closing stop.
Unfold the arms in the
direction of the gate,
keeping a distance of
15 cm
between the
fastening axis of the arms
and the fold in the arms.
4
Fasten the wing clevis
Mark out the centre
distances on the wing.
Remove the arms,
Drill.
Fasten the clevis.
3
Position the wing clevis
Push the motor arm
flat against the inside
closing stop.
2
Mount the lower closing stop
Place the lower closing
stop against the
stationary retainer
(opposite side to the
pillar/motor fastening
plate).
5
Mount the upper opening stop
Open the wing
according to the
desired angle.
Place the upper
opening stop
against the
stationary retainer
(pillar/motor
fastening plate
side).
6
Block the stops
Make sure that the arms are
perfectly
horizontal before
drilling.
