5
5
Assembly process
Mark out a horizontal axis
(AH) in the middle of the
brace, perpendicular to the
wing's axis of rotation.
Extend this axis onto the
pillar
as far
as the
intersection with AM.
Gate with no brace:
if the
gate has no no brace, place
the motors at approx. 1/3 of
the height of the wings
starting from the ground.
In addition, you will be
required to provide for
brackets for fastening the
clevises (see page 4).
Place the motor/pillar
fastening plate at a distance
of
54 mm above AH.
Mark out the drilling points
and drill them: to improve
adjustment, use the round
holes to make your mark,
drill, then turn the fastening
plate over and fix using the
oblong holes.
Check that the
plate is in a
p e r f e c t l y
h o r i z o n t a l
position.
Mounting the fastening plate
1.
Mount the fastening
gudgeons on the pillar
fastening plate, screw
them as far as the
thread will go.
2.
Slide the spacers
onto the fastening
gudgeons.
3.
Position and
fasten the motor.
Check that it is in a perfectly horizontal position:
Mounting the motor on the plate
