animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 33
6.5.1.2 Number of Zones
Specify how many zones the project is divided into (1 - 4/8). You can also designate individual zones.
Examples of how to define a zone:
You have a project with the following layout and 5 motorized products (roller shutters, Venetian blinds, etc.):
Example 1:
1 to 5 are exterior Venetian blinds
Since there are 2 façade fronts facing different directions, we choose 2 zones in this case. For anyone wish-
ing to set up completely independent automatic functions on a single façade front (for example different
switching times for bedrooms, office, conference room, etc.), this façade front can be split into multiple
zones.
Example 2:
1 and 2 are roller shutters, 3 to 5 are exterior Venetian blinds
Since you have roller shutters and one exterior Venetian blind on the east-facing façade front, you should
divide this façade into two zones. In this example, you therefore have three zones. But why split up the east-
facing façade? As you typically enable a wind alarm for the Venetian blind and not for the roller shutters.
Aside from this, you wish to move the Venetian blind to a position with subsequent slat turning in the event of
direct sun. In the case of a roller shutter, there is no slat turning, only an up/down command.
6.5.1.3 End Products
Once you have specified how many zones are required, you now need to determine which end product is
installed on a zone by zone basis.
This selection must be made very accurately, as it is critical for smooth functioning of the system. For exam-
ple, if you define a Venetian blind as a roller shutter, you cannot later set up any slat turning options for this
motorized product.
The setting refers only to the zone that is shown in black on the screen. You can navigate from zone to zone
using the white forward and back arrows. Do not exit the menu until all zones have been set up.
Selecting the end product:
You can use the black forward and back arrows to navigate through the selec-
tion list.
Selecting "Outside/Inside":
You can narrow down the product selection by first defining whether the mo-
torized product is installed outdoors or indoors.
Selecting "Standard Motor/Electronic Motor":
An electronic drive has different start-up behavior from a
standard drive. Taking this parameter into account improves operator ergonomics and the positioning accu-
racy of the end product/motorized product.
The following Somfy drives can be used in combination with TouchBuco and animeo IB+ motor controllers:
•
Standard Motor: LT, SLT, LS and J4 ranges (without WT designation).
•
Electronic Motor: WT range (Oximo, Ilmo, Orea) and J4 WT
Содержание animeo IB+ 4 Zone Touch Building Controller
Страница 49: ......