13
EN
Sonesse 40 io
Copyright
©
2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
2.3.5. Re-setting the end limits
Readjusting the upper end limit
1) Press the
Up
button on the control point to move the motorised
product to the end limit to be readjusted.
2) Press the
Up
and
Down
buttons at the same time until the motorised
product moves up and down.
3) Press the
Up
or
Down
button to move the motorised product to the
new desired position.
4) To confirm the new end limit, press the
my
button until the motorised
product moves up and down.
Readjusting the lower end limit
1) Press the
Down
button on the control point to move the motorised
product to the end limit to be readjusted.
2) Press the
Up
and
Down
buttons at the same time until the motorised
product moves up and down.
3) Press the
Up
or
Down
button to move the motorised product to the
new desired position.
4) To confirm the new end limit, press the
my
button until the motorised
product moves up and down.
2.3.6. Modifying the direction of rotation
1) Position the motorised product at the mid-height position.
2) Press the
Up
and
Down
buttons at the same time until the motorised
product moves up and down.
3) Press the
my
button until the motorised product moves up and down.
2.4. INSTALLATION TIPS AND ADVICE
2.4.1. Questions about the Sonesse 40 io?
Observations
Possible causes
Solutions
The motorised
product does
not work.
The wiring is incorrect.
Check the wiring and modify it if necessary.
The drive is in thermal protection mode.
Wait for the drive to cool down.
The control point battery is low.
Check whether the battery is low and
replace it if necessary.
The control point is not compatible.
Check for compatibility and replace the
control point if necessary.
The control point used has not been
programmed into the drive.
Use a programmed control point or program
this control point.
1)
2)
3)
4)
1)
2)
3)
4)
1)
2)
3)
