SOMERSET
SDP-747
SERVICE MANUAL
1 Esquire Road, North Billerica, MA
www.smrset.com
(800) 772-4404
Top Locking Bolt
(1/2
” Wrench)
Bottom Adjusting Bolt
(5/8
” Wrench)
At all 3 points
:
Hold the
“Bottom Adjusting” Bolt in place. DO NOT ALLOW THIS TO MOVE.
Loosen and remove the 3
“Top Locking” Bolts.
Raise the plate carefully, using the press handle, and Inspect the wiring, connections,
and limit switch.
To Re-Assemble, At all 3 points
:
Hold th
e “Bottom Adjusting” Bolt in place. DO NOT ALLOW THIS TO MOVE.
Insert and tighten the 3
“Top Locking” Bolts, torque the bolts evenly, and insure
the platens are level when complete.
Page7of28
"THIS DRAWING AND SPECIFICATIONS ARE
THE EXCLUSIVE PROPERTY OF SOMERSET
INDUSTRIES INC. IT MAY NOT BE USED
OR REPRODUCED IN WHOLE OR PART, NOR
MAY IT BE SENT TO ANY OTHER VENDOR
WITHOUT THE EXPRESS WRITTEN CONSENT
OF SOMERSET INDUSTRIES INC."
Author: GJH
Date: 3/11/11
App
’d: GJH
Date: 3/11/11
REV
C