SOMA PIPE, Руководство пользователя

Страница: 12 / 22

PIPE USER MANUAL
SYNTH
Controls assignment:
Knob
•
— REV MIX — controls volume level for delay/reverb;
Knob • • — LPF — controls the cut-off frequency of the dynamic low-pass filter;
Knob
• • •
— REV TIME — controls reverb and delay time;
Sensor FX — OCTAVER — adds an octave below.
Description:
SYNTH lets you create leads with a sound similar to a synthesizer. It features a dynamic
low-pass filter with adjustable cut-off frequency, along with a reverb/delay and octaver.
Tips for using this algorithm:
When using the octaver, make your voice softer, without strong overtones, close to a sine
wave.
Try making noise and percussive sounds.
REVERB
Controls assignment:
Knob • — REV MIX — controls reverb volume level;
Knob
• •
— DLY FB — controls delay volume level and feedback depth;
Knob
• • •
— REV TIME — controls reverb time;
Sensor FX — DIST DLY — adds distortion and delay (if DLY FB knob > 0).
Description:
This the simplest and easiest to understand algorithm — a reverb plus adjustable distortion and
delay. When the REV MIX knob is turned down, you will hear the dry sound from the microphone.
It is the only algorithm that lets you hear the unprocessed input signal. The FX sensor turns
on distortion which can be used as drive for softer sounds or as saturator. By turning the DLY
FB knob you will gradually add delay to the distortion and make the feedback deeper. When
DLY FB approaches the maximum, the delay will start to self-oscillate, which you can stop
by releasing the touch sensor. This is an extreme mode and should be approached carefully.