Soma Networks SOMAport, Руководство по установке

Страница: 46 / 80

46
SOMAport Setup Guide
5
Check TCP/IP properties:
i
Click Properties with the correct TCP/IP connection selected.
The TCP/IP Properties window opens to the IP Address tab.
ii
Make sure the Obtain an IP address automatically radio button is enabled.
iii
Click the DNS Configuration tab.
iv
Make sure the Disable DNS radio button is enabled.
v
Click OK on the TCP/IP Properties window.
vi
Click OK on the Network window.
vii
Restart the computer if prompted to do so.
6
Check your Internet connection by launching a Web browser on the computer
connected to the SOMAport.
If your browser automatically opens to your service provider’s Web site, full
service has already been activated.
If your browser does not automatically open to your service provider’s Web site,
go to step
7 .
7
Enter a valid Internet address (such as www.web.com) in the Address field and
press Enter.
„
If the Web.com Web page opens, full service has already been activated and
you can begin using your SOMAport for Internet service.
„
If your service provider’s Web page opens, activate full service by following
the sign-up procedure that is provided on the Web site.
„
If your computer attempts to connect to the Internet using an old dial-up
connection, see
“The computer uses an old dial-up connection to connect to
the Internet” on page 74 .
„
If you do not get an Internet connection, see “Finding problem causes” on
page 64 .