21
3. Normal Use
*
Lighting
:
a) Place firewood of the correct size (mentioned above) in the unit, piled
horizontally;
b) Place some pine cones (preferably) on the ash grate;
c) If required to make lighting easier, open the air regulator completely
to allow the inflow of combustion air and then regulate the burn intensity;
d) The lighting period is over when the body of the stove has reached a
constant temperature.
* You should check that there is sufficient ventilation in the room where the unit
is installed, otherwise it will not work properly. For this reason, you should check
if there are any other heating devices which consume air during operation (e.g.
gas-fired equipment, braziers, etc). We recommend against using these devices
all at once;
* The air for combustion is drawn from the surrounding room, consuming
oxygen. You should check that ventilation grilles and other devices for allowing
air to enter from outside remain unobstructed;
* You should only open the door during reloading. Normal conditions of use
require the door to remain closed;
