22
SNMP Settings
– Managing devices on IP networks. Default setting is Disabled.
SSH Settings
– Secure Shell. Enable your OUTDOOR AP/CPE unit to access secure
shell (SSH) based network device. Default setting is Disabled.
O
PERATION
M
ODE
The Operation Mode content four modes: AP Bridge, AP Router, Client Router and
Client Bridge.
◆
AP Bridge
— The wired Ethernet and wireless are bridged together. Once the
mode is selected, all WAN related functions will be disabled.
◆
AP Router
— The WAN port is used to connect with ADSL/Cable modem and the
wireless is used for your private WLAN. The NAT is existed between the 2 RJ45 ports
and all wireless clients share the same public IP address through the WAN port to
ISP. The default IP configuration for WAN port is DHCP client
◆
Client Router
— The OUTDOOR AP/CPE will behave just the same as the client
mode for wireless function. However, router functions are added between the
wireless WAN side and the Ethernet LAN side. Therefore, the WSIP subscriber can
share the WISP connection without the extra router.
◆
Client Bridge
— The OUTDOOR AP/CPE will behave just the same as Wireless
adapter. With Client Bridges, the WLAN and the LAN are on the same subnet.
Consequently, NAT is no longer used and services that are running on the original