14
Security Mode
— Select the security method and then configure the required
parameters. (Options: Disabled, WEP-AUTO, WPA-PSK, WPA2-PSK, WPA-Auto-PSK,
WPA, WPA2, WPA-Auto, 802.1X; Default: Disabled)
O
PERATION
M
ODE
–
AP
B
RIDGE
1)
In this mode bridge your OUTDOOR AP/CPE to another Access Point.
2)
Network Name (SSID)
—
SSID (Service Set Identification) must be assigned to all
wireless devices in your network. Considering your wireless network security.
Security Mode
— Select the security method and then configure the required
parameters. (Options: Disabled, Open, Shared, WEP-AUTO, WPA-PSK, WPA2-PSK,
WPA-PSK_WPA2-PSK, WPA, WPA2, WPA1_WPA2, 802.1X; Default: Disabled
O
PERATION
M
ODE
–
C
LIENT
R
OUTER
In the Client Router mode is also known as WISP. The OUTDOOR AP/CPE wireless
side is connected to the remote AP (Base-Station) as in Client Infrastructure mode.
Between the wireless and LAN is the IP sharing router function. This is used to
share Client Router connection. The WAN is on the wireless side.
