Getting Started
A
. First, connect the power adapter to the
receptor
at the back panel of
the
802.11g Wireless Access Point
and then plug the other end of the power adapter to
a wall outlet or power strip. The Power LED will turn
ON
to indicate
proper operation.
B.
Connect your 802.11g Wireless Access Point LAN port with your straight-through
Ethernet cable into a switch/router.
Link
LED for the LAN Port will illuminate to indicate a
proper connection.
C.
Desktop or laptop
c
omputers with 802.11b or 802.11.g wireless adapters can connect
to the 802.11g Wireless Access Point.
Right out of the box, with its default settings, the 802.11g Wireless Access
Point will automatically connect with other wireless products
IP ADDRESS
Note: If you are using a DHCP-capable router in your network setup you will
not need to assign a static IP Address.
If you need to assign IP Addresses to the computers on the network, please
remember that the
IP Address for each computer must be in the same IP
Address range as all the computers in the network
, and the Subnet mask
must be exactly the same for all the computers in the network.
For example: If the first computer is assigned an IP Address of 10.0.0.2 with
a Subnet Mask of 255.0.0.0, then the second computer can be assigned an
IP Address of 10.0.0.3 with a Subnet Mask of 255.0.0.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP
Address, one or more of the devices may not be visible on the network.
11
Содержание Wireless Access Point
Страница 1: ...802 11g Wireless Access Point User s Guide ...
Страница 3: ...3 ...
