6
VeseNET,
1.4 Setup
Plug and Play Installation for Homes:
HomePlug is plug and play device; user is able to plug and play without any complex configuration and settings.
Please execute the following hardware installation steps 1 to 4.
Installation in homes with Existing HomePlug Networks:
1. Connect the
Piggy6
to your devices.
2. Plug the
Piggy6
into a power outlet.
3. W ait a few seconds for startup to be completed, and then check the LEDs
The
Power
LED should be ON.
The
HomePlug
LED will be ON
4. Hardware Installation is now completed, enjoy HomePlug Powerline connectivity.
Installation in homes with NO EXISTING HomePlug Network:
1. Make sure that another HomePlug 200M device is connected to your network at the router or directly to a com-
puter.
2. Connect the
Piggy6
to your devices.
3. W ait a few seconds for startup to be completed, and then check the LEDs
The
Power
LED should be ON.
The
HomePlug
LED will be ON
4. Hardware Installation is now completed, enjoy HomePlug Powerline connectivity.
