Authentication Mode
– You can select desired Authentication Mode: Open System, Shared , WEP Auto,
WPA-PSK and WPA2-PSK. When you select Open system or Shared or WEP Auto, you can set the WEP
encryption. When you select WPA-PSK or WPA2-PSK, you can set the WPA-PSK Security.
Encryption-
you can select None or WEP encryption.
WEP Encryption
- You can select the WEP key length (64-bit, or 128-bit) for encryption. "None" means this
WEP key entry is invalid.
Default KEY ID-
Select which of the four keys will be used then can enter the matching WEP key information
for your network in the selected WEP KEY. These values must be identical on all wireless stations in your
network.
WEP Key Format-
You can select ASCLL or Hexadecimal Format.ASCLL Code Format stands for any
combination of keyboard characters in the specified length.Hexadecimal format stands for any combination
of hexadecimal digits(0-9,a-f,A-F) in the specified length.
Key Type-
You can select the WEP key length(64-bit, or 128-bit, or 152-bit) for encryption. ”Disabled” means
the WEP key entry is invalid.
z
For 64-bit encryption-You can enter 10 hexadecimal digits(any combination of 0-9,a-f,A-F,zero key is
not permitted)or 5 ASCLL characters
z
For 128-bit encryption-You can enter 26 hexadecimal digits(any combination of 0-9, a-f, A-F, zero
key is not permitted)or 13 ASCLL characters
z
For 152-bit encryption-You can enter 32 hexadecimal digits(any combination of 0-9, a-f, A-F, zero
key is not permitted)or 16 ASCLL characters
18
