User Manual
1. Open the door and press "1" for (5) five seconds. The buzzer will sound once
and enter Programming Mode.
2. "PROGRAM" will show in the LED display.
3. Press any number (0-9) and the LED will display the saved time.
Then you can input the time you need.
4. Press the desired Power Button (0% HOLD, 20% DEFROST, 50% MEDIUM, or
70% MED-HI) to input the power level. The LED display will show the related
power. If the same button is pressed twice, or if no power is chosen, "PL10" is
default.
5. To change the cooking factors: If you press "X2", LED display will show "CF:80".
80% is the default power. If you would like to change the power, press one of
the Power Buttons to set.
6. After setting the time and power, press and hold the green "START/CONFIRM"
button for 30 seconds. The LED display will show "PROGRAM" once settings
have been saved.
7. If the set cooking time exceeds the maximum time, a buzzer will sound when
"START/CONFIRM" is pressed. The LED display will return to "PROGRAM" and
the previously set time will not change.
8. To return to Ready Mode: Close the door.
9. To cancel programming, press the "PAUSE/RESET" button to return to Door
Open Mode. Unsaved program will be lost.
10. If there is a program saved as a memory feature, press the related number
button and the saved program will start. If there is no saved program set, the
buzzer will sound when the number button is pressed.
1. This mode allows cooking through a one button operation.
2. While in Ready Mode, press one of the ten digit buttons on the keyboard to run the Preset Program associated with that button.
3. Remaining cooking time will be displayed. If it is a multi-stage cooking preset, the total remaining time will be displayed, not a particular stage
cooking time.
4. When the cooking program is finished, the oven will enter End of Cook Cycle Mode.
5. If the red "STOP/RESET" button is pressed, the oven will enter Pause Mode.
1. While the oven is cooking or in Pause Mode, if User Option "OP:51" is selected, press a preset button to start it's Preset Cooking Program
automatically.
2. The remaining cooking time will be displayed.
3. When the cooking program is finished, the oven will enter End of Cook Cycle Mode.
4. If the red "STOP/RESET" button is pressed, the oven will enter Pause Mode.
Note:
1. If the electricity is cut off, the saved programs will NOT be lost.
2. If a program needs to be reset, just repeat the above steps.
3. If "STOP/RESET" is pressed at the last step, the microwave will
return to Door Open Mode and the setting will NOT be saved.
Programming Mode
This mode allows the user to assign cook times and power levels to the one touch buttons.
Preset Program Cook Mode
On the Fly Cooking
NOTE: See following page for User Option setting instructions.
Control Panel and Features
OPERATION
(1) Power Buttons
(2) Time cook Button
(3)
(4)
Start Button
(5)
X2 Button
(6) Number Button
Stop/Reset Button
10
(1)
(2)
(3)
(4)
(5)
(6)
(1)
