Page 14 / 17
SPECIFIC FUNCTIONS OF THE REMOTE-CONTROL REC DUO 100 PLUS RC
RESTORE FACTORY SETTINGS
Press for a few seconds and simultaneously release the
0, 1, 6 and 7 KEYS
on the remote control. The LED will
flash
RED
and
PURPLE
. When they stop flashing, the devices will return to the previous mode, but with the
factory-set values.
CUSTOMISATION OF FACTORY SETTINGS
To increase and/or decrease the limit values, press and release the keys repeatedly as shown below.
SPEED ADJUSTMENT 1 - KEYS 2
Speed 1 can be set between 30% and 70%. In the factory settings mode, this value is 30%. The setup is reflected
on all synchronised devices.
Sequence:
1.
Select KEY 2 - SPEED 1.
2.
To enter SETUP MODE, press KEY 2 and KEY 3 simultaneously for a few seconds. The
STATUS LED on the product indicates when this mode is activated by
FLASHING
BLUE
.
3.
Press KEY 2 to reduce the speed or press KEY 3 to increase it. The increase or
decrease in speed is shown by the respective increase or decrease in the
frequency with which the BLUE LED flashes. During the speed adjustment phases,
if you want to increase or decrease the previously set one, between one signal
and the other (flashing blue), a red visual signal is interposed which indicates that
the signal has come to fruition.
4.
Press the 0 KEY to exit the SETUP MODE or alternatively wait about 10 seconds
without pressing any keys.
NB: During the speed adjustment phase, the full-scale value is highlighted by a
GREEN light signal.
SPEED ADJUSTMENT 2 - KEYS 3
Speed 2 can be set between 70% and 100%. In the factory settings mode, this value is approximately 90%. The
setup is reflected on all synchronised machines.
Sequence:
1.
Select KEY 3 - SPEED 2.
2.
To enter SETUP MODE, press KEY 2 and KEY 3 simultaneously for
a few seconds. The STATUS LED on the product indicates when
this mode is activated by
FLASHING PURPLE
.
3.
Press KEY 2 to reduce the speed or press KEY 3 to increase it.
The increase or decrease in speed is shown by the respective
increase or decrease in the frequency with which the PURPLE
LED flashes. During the speed adjustment phases, if you want
to increase or decrease the previously set one, between one
signal and the other (flashing purple), a red visual signal is
interposed which indicates that the signal has come to fruition.
4.
Press the 0 KEY to exit the SETUP MODE or alternatively wait
about 10 seconds without pressing any keys.
NB:
During the speed adjustment phase, the full-scale value is
highlighted by a GREEN light signal.
LED INTENSITY ADJUSTMENT
The brightness of the LED on the product is adjustable from maximum to off. This parameter can be set
individually on each REC DUO 100 PLUS RC.
Sequence:
1.
Press KEY 4 and KEY 5 simultaneously for a few seconds to enter SETUP MODE. The STATUS LED on the product
indicates when this mode is activated with a
PURPLE
light.
2.
Press KEY 2 to reduce the brightness or press KEY 3 to increase the brightness. The increase or decrease of the
brightness value is shown by the respective increase or decrease of the LED brightness.
3.
Press the 0 KEY to exit the SETUP MODE or alternatively wait about 10 seconds.
