5A
Button
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
Fuse
For over current protection.
Only for remote control
By connect to the 1/4’’ microphone jack to control the unit for Stand by, Function and Mode
function.
Mains input
Connect to supply mains power.
DMX input/output
For DMX512 link, use 3/5-pin XLR plug cable to link the unit together.
4.2 Main Function
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the mode. Once the required mode has been selected,
Press
ENTER
button to store. Back to the main functions without any change press the
MENU
button or wait for 8 seconds.
Hold
MENU
button to quit menu mode, the unit will run the built-in program you selected.
The main functions are shown below:
10A
5. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By easy controller
3. By universal DMX controller
5.1 Master/Slave Built-in Preprogram Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show.
2-light show
In slave mode, slave 1 means the unit run as the master unit and slave 2 means 2-light show.
In order to create a great light show, you can set slave 2 on the second unit to get contrast
movement to each other, even if you have two units only.
5.2 Easy Controller
The easy remote control is used only in master/slave mode. By connecting
to the 1/4” microphone jack of the first unit, you will find that the remote
controller on the first unit will control all the other units for Stand by,
Function and Mode selection.
Stand By
Blackout the unit
Function
1. Sync. Strobe
2. Async strobe
3. Sound Strobe
Select Show
1-4
Fade Speed
1. Fast
2. Middle
3. Slow
Hold to adjust
1. Pan position
2. Tilt position
3. Dimmer
Mode
Sound (LED OFF)
LED On
LED Slow
blinking
LED Fast
blinking
