Solution FIres SLE125t, Инструкция по эксплуатации

Страница: 10 / 24

10
Front Glass Installation
A. Before installing the front glass, ensure the logs have been positioned satisfactorily.
B. Lift the glass up and sit into the bottom groove, holding the glass vertical not flat while carrying.
Hold and turn the top of glass to flat touch the side panel. See Figure 10.
C. Reinstall the 4 screws, see Figure 11.
Installation - Suggested Log Layout
NOTE: There is no particular requirement to lay out the logs as shown in the photographs above.
The only requirement is that the small triangular openings in the fuel bed of Side B of the fire - any
encroachment on this area will reduce the effectiveness of the flame effect.
I. Install the log set to suit your own style. Install the front trim by aligning with the pins on the
appliance. This ensures the touch display panel performs properly.