Soluna S4 EU-A36, Руководство пользователя

Страница: 20 / 52

20 / 52
3.2 Installation spacing
In order to ensure good ventilation of the energy storage integrated machine,
please reserve enough installation spacing around the machine during
installation.
Position Min spacing Remark
Side spacing 100cm
Back spacing 10cm It needs to be installed against the wall
Note : For detailed requirements about the narrowest maintenance channel, escape
route, etc., refer to the applicable standards of the country/ region where the
project is located.
3.3 Wire specifications
In order to standardize the specification of ac and dc connectors or terminals of
compatible inverters, the following requirements are required for connecting ac
and dc wires of corresponding types of inverters
PV side GRID side Load
It is recommended to use 4
mm
²
of wire
It is recommended to use 4
mm
²
of wire
It is recommended to use 4
mm
²
of wire
3.4 Installation step
3.4.1 Unpacking confirmation
Before unpacking, check carefully whether the product information in the order is
consistent with that on the nameplate of the package box, and whether the product
package is intact. If there is any question, please contact the supplier timely.
Store the idled machine in its original package, and take anti-moisture and anti-dust
measures. after taking the machine out of the box, check the following items:
Item Name Qty (pcs) Remark
1 System case 1
2 Battery module 1
3 key 1
4 Screws-M6*12 10
5 Screws-M5*8 1
6 Screws-M4*6 6
7 Expansion bolts-M8*100 4
8 Module mounting bracket 1
9 Wall mounting bracket 1
10 PV connector removal tool 1