SOLTRON V-45 Turbo Plus, Руководство по эксплуатации

Страница: 33 / 80

32
Sa
fety
Please read and observe ...
Safety
• All danger and safety notes attached to the device must be observed!
• No safety equipment (e.g. panel switch) or safety notes may be re-
moved or deactivated which can impair the safe operation of the de-
vice!
• The device may only be operated in proper condition!
1) In Germany: VDE regulations
• A timing device must be designed so that the device is automatically
switched off at the latest after <110% of the selected operating time
even when the controller fails. The device operating time must be
dual controlled with a timing device in accordance with
EN 60335-2-27.
2)
• Do not change, obstruct or block the air inflow and outflow area to the
device or make any unauthorised changes to the device. The manu-
facturer shall bear no liability for damage or injuries resulting from
such actions.
Export
We emphasise that these devices are intended for the European market
and must not be exported to nor operated in the USA or Canada!
The manufacturer shall assume no liability whatsoever in case of non-ob-
servance! We explicitly emphasise that high liability risks may occur for
the exporter an/or the operator in case of non-observance.
Accessories
An overview of the possible accessories is provided in the sales docu-
mentation. See page 46 for a selection of these.
2) JK timer controller see Page 127
Danger!
Assembly and electrical connection must comply with the na-
tional regulations.
1)
The electrical installation is to be fitted with an easily accessible
all pole isolating device (master switch) on the building side,
complying with overvoltage category III. This means that each
pin shall have a contact opening width complying with the con-
ditions of overvoltage category III for full isolation.
If it is connected via a plug and socket, the plug system used
shall comply with EN 60309-1/A11; 5-pin; 400 V AC (16A or
32A) shall be used.
Assembly, installation, upgrading or repair of the device may
only be carried out by specially trained and instructed person-
nel.