Cleaning and maintenance
06/2014
1008981-02A
Operating instructions – 35/56
4.2
Faults
Error codes are output to the display to simplify troubleshooting:
If a fault occurs, the error code flashes on the display.
If several errors occur, the error messages are displayed alternately.
Error elimination is acknowledged by pressing the
START/STOP
button.
If the error cannot be cleared, inform Customer Service - see page 2.
More detailed information regarding the error description and solutions is
available in 'Fehlercodes/Error Codes' (order no. 1011804-..).
4.3
Cleaning
DANGER!
Infections can be spread by skin contact!
All objects / device parts touched by the user during use,
must be disinfected after every use:
–
Holding bars and control panel
–
Protective goggles
–
MP3 cable
–
Acrylic glass panels
–
Foot mat (plastic) mirror
NOTE:
Adhere to the stipulated times to ensure thorough disinfec-
tion. Follow the manufacturer's instructions for use.
4.3.1
Cleaning the surfaces
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run, to
damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
–
Remove rings, watches, bracelets etc. before starting cleaning work.
4.4
Lamps
UV low pressure lamps can be cleaned with a damp cloth and without
additional cleaning agents where necessary.
