SOLTRON S-40 Champ *** Super Скачать руководство пользователя страница 43

47

W

ar

ran

ty Claims

Warranty

Warranty Claims

Policy & Procedures

1. When to file a Warranty Claim:
In the event that your tanning system is not functioning properly under in-
tended normal use as described in the unit's Operation an Instruction 
Manual, you may then have established cause to file a Warranty Claim.

NOTE

: Both the tanning system and legal registered owner 

must meet the criteria established under Soltron Limited War-
ranty as described in this manual before any Warranty Claim 
will be considered.

2. Where to call to place a Warranty Claim:
Soltron is supported nationwide by an extensive dealer/distributor net-
work through whom the majority of our units are sold. These dealers/dis-
tributors are required by contract to stock sufficient parts to meet the 
various warranty and nonwarranty needs of their customers.
Therefore, in order for you to properly file a Warranty Claim, you must lo-
cate the name and phone number of the dealer/distributor through whom 
you purchased your unit. Normally this information can be easily located 
either on your paid invoice or other proof of purchase documentation that 
you received when taking delivery of the unit.
Next, notify the dealer/distributor of the serial number, model number and 
date unit was purchased. This will initiate the Warranty Claim process.
Upon determination of the problem, your dealer/distributor can then sup-
ply you with the part(s) and proper instructions to return your unit to 

working order.
Each dealer/distributor has their own internal procedure for handling 
Warranty Claims and credits.

NOTE

: Soltron, the manufacturer, does not involve itself in the direct han-

dling of a Warranty Claim except where mitigating circumstances apply 
and where required by law.

Parts Warranty Claim/Credit Review

1. Customer calls Soltron and notifies the Service Department of prob-

lem

2. Soltron Service Department determines course of action.
3. Soltron ships part and R.A.I. to customer freight collect and bills cus-

tomer on net30 basis for part only.

4. Customer, within 15 days of receiving new part, returns defective part 

to Soltron along with R.A.I.

5. Upon receipt of defective part and R.A.I., Soltron issues customer a 

credit invoice which offsets original bill. Customer's account is re-
turned to zero balance concerning this claim.

NOTE:

 If part returned to Soltron proves to be operational 

and not defective, or if product code numbers on part do not 
correspond with individual unit date on file with Soltron, then 
a 30% restocking fee will be charged in addition to the retail 
purchase price of part.

Содержание S-40 Champ *** Super















































Отзывы: