SOLTEK SL-75ERV, Руководство пользователя

Страница: 75 / 94

Chapter 4 BIOS Setup
75
Reset Configuration
Data
Normally, you leave this Disabled. Select Enabled
to reset Extended System Configuration Data
(ESCD), when you exit Setup if you have installed
a new add-on and the system reconfiguration has
caused such a serious conflict that the operating
system cannot boot.
Resource Controlled
By
The Plug and Play AwardBIOS can automatically
configure all the boot and Plug and Play-compat-
ible devices. If you select
Auto , all the interrupt re-
quest (IRQ) and DMA assignment fields disappear,
as the BIOS automatically assigns them.
PCI/VGA Palette Snoop This option allows the BIOS to preview VGA status,
and to modify the information delivered form the fea-
ture Connector of the VGA card to MPEG card. This
option can solve the display inversion to black after
you have used MPEG card.
Assign IRQ for USB Select Enabled if you system has a USB controller
and you have one or more USB devices connected.
If you are not using your system’s USB controller,
select
Disabled to free the IRQ resource.
Assign IRQ for VGA Select Enabled if you system has a VGA controller
and you have one or more VGA devices connected.
If you are not using your system’s VGA controller,
select
Disabled to free the IRQ resource.
NOTE:
BIOS will automatically disable all PnP resources except the boot
device card when you select Yes on Non-PnP operating system.
PNP OS Installed Select Yes if the system operating environment is
Plug-and-Play aware (e.g., Windows95).