INSTALLATION
0
3
0
4
1. Please use the measure card to correctly
position the hole drillings then drill 3 holes
of 6mm
2. Fix 3 expansion plugs into the holes
3. Fix 3 screws into the expansion plugs leaving
spare space to hang & secure the light.
4. Hang the notch onto the screws and fasten
the lamp
5. Press the power button on the back to
program the operating mode
MODE A
Automatically turn on at dusk (< 30 Lux) and remains
at 20% brightness for 5 hours then turns off.
Measure Card
X 1
Power Button
Expansion
Plugs
X 3
Light
X 1
Screws
X 3
6mm
Please press the power button to program an
operating mode:
Press 1 time for
MODE A
Press 2 times for
MODE B
Press 3 times for
MODE C
Press 4 times to
TURN OFF
OPERATING
MODES
MODE B
Automatically turns on to full brightness (800LM)
when motion is detected in the range ≤19.7ft and then
dims to 3% brightness in 20 seconds of no motion.
MODE C
Automatically turns on to full brightness (800LM)
when motion is detected in the range ≤19.7ft and
then turns off in 30 seconds of no motion.
120°
120°
120°
120°
