08
09
05
Installation and Wiring Compliance
1. Installation and wiring must comply with the State and National
Electrical Codes.
2. The Sunlike 50W models are intended for outdoor use only
and should not be installed in an unventilated area, and shall be
installed in an environment within the operational temperatures
defined for the product.
3. The average sunshine in the installation area should be above
3.5 hours/day in order to ensure full function of the lighting fixture.
Avoid areas with shades.
4. Before installation, if applicable, please ensure the light pole and its
foundation are solid enough to withstand the lighting fixture(s).
5. Before installation, please ensure that the battery is fully charged. Install
during sunny days if possible.
6. Before installation, please press the ON/OFF key in the remote
control and check whether it shows a red light on the indicator.
Please cover the panel and check if the light module turns on normally
within 1 minute.
After Installation
The lighting fixture will automatically turn on at night and turn off
during daylight.
Important
Always orient the solar panel facing the equator (e.g. facing south if in
northern hemisphere).
Always have a tilt angle of at least 15° to avoid dust accumulation
(0°=horizontal plane).
Ordering Information Chart
Sample Number: TLSTC50XYYZZ
For example: TLSTC503MSGY
This means the customer wants a Sunlike 50 watt, 3000k temperature,
mounting sleeve installation, with a gray finish.
DO NOT
send the sample number directly to our sales. Use the
information in the chart above to create a model number with
the correct series, wattage, temperature, mounting option, and finish
for the product that you want.
Series
Wattage
Color
Temperature
Mounting
Options
Finish
TLSTC
=Sunlike
50
=50W 9000 Lumens
X=3
=3000K
X=4
=4000K
X=5
=5000K
X=6
=5700K
YY=MS
=Mounting Sleeve
ZZ=GY
=Gray
ZZ=BR
=Bronze
06
Mounting Accessories
If your round pole size is over 3.125 inch, or you use square pole, please
connect with pole manufacturer for the tenon adapter.
MOUNTING SLEEVE
POLE ASSEMBLY
TENON ADAPTER
MOUNTING SLEEVE
—CUTAWAY
Ø2.4 inch–Ø3.125 inch
Ø3.125 inch
Ø3.125 inch
Top of Pole
—
Round
Tenon Adapter
—Round
Tenon Adapter
—Square
7.2 inch
Pole
3.1 inch
0.37 inch
8.15 inch
5.31 inch
7.08 inch
2.16 inch
3.125 inch
