07
how much
overlap?
Determining overlap on cubes and approximate cube shaped boxes:
The left example shows a quarter inch overlap. The right example shows an
inch and a quarter overlap. For cubes, we recommend a smaller overlap.
You’ll need to use more caution to make sure the box is centered as you
wrap, but there will fewer layers of film and a neater appearance.
Determining overlap on shallow end boxes:
With less depth on the ends, the amount of overlap is a bit different than
with square shaped ends. If you allow very little overlap (see the top exam-
ple above) the ends look more cluttered. We recommend a full end over-
lap (as in the lower example). You achieve this by adding the span + end
depth + end depth again. The ends will look neater and you won’t have to
be as cautious to perfectly center your box.
TEST YOUR SIZE BEFORE ORDERING:
Before you place your custom roll order, cut some paper to the desired
width. Wrap this around your box and tape in place. This is the best way to
determine if what you think you need is REALLY what you need.
