11
INSPECT YOUR SOLOSTRENGTH ULTIMATE GYM PRIOR TO EACH USE
Before beginning your workout session, be sure to make the following inspection:
To view the latest accessories to use with your SoloStrength System, please visit our website at
www.SoloStrength.com
to register your email address to be notified of new accessories and special promotions.
ROUTINE MAINTENANCE
Make sure all the screws and bolts are securely in place and the support bar is level and locked into
position. Handles are not locked until the security rings (or grooves) are fully exposed on the bar.
Check that the support bar is traveling correctly in the groove on each side and free of resistance.
•
•
Wipe down your SoloStrength System on a regular basis using a clean cloth and light soapy solution. Do
not leave wet towels or workout clothing laying or hanging on the equipment.
Periodically check the slider(s) for signs of wear, and all check to tighten all locking screws and bolts.
Contact SoloStrength if any damage is noticed and don’t use the systme until that part is replaced.
If debris should cause resistance in the channel of your SoloStrength and its sliding function, use a
disposable towel to wipe clean the channels and the sliders, and re-apply a small amount of lubrication
inside the sliding channel on each side of the SoloStrength structure.
Silicone or lithium based spray is preferred lubricant the unit. Multi purpose 3-in-1 oil or machine oil can
also be used to lubricate the springs in locking pins and channels. Small amounts only are helpful for
optimal function..
•
•
•
•
Inspection, Maintenance & Storage
Accessories
