Table 1:
Symbols (continue)
Symbols
Standard
Reference
Description
This symbol is solely applicable in EU countries. In order to avoid any negative
consequences on the environment and possibly also on human health, this
instrument must be disposed of according to the current provisions (i) in EU
countries in compliance with the WEEE provision (Directive for waste consisting
of electrical and electronic devices), or (ii) for all the other countries, in
compliance with the local provisions and laws on recycling.
2.2 SAFETY GUIDELINES
•
SOLOS device can only be used for the design purposes described in this manual.
•
The device must be used in the environmental conditions as specified in this docu-
ment.
•
The least favorable environment is defined as the maximum values of temperature
for the unit to be operating in, while the unit is consuming the maximum current.
The environmental value is stated as
+
40
°
C
.
•
The device must be connected to an appropriate power source, otherwise its perfor-
mance may be reduced.
•
Position the unit so that it is not difficult to disconnect the plug for connection
to the main supply.
•
Keep this manual at hand and close to the device at all times.
•
Turn off the device if it is not going to be used for a long period of time.
•
Only use original SOLOS Series accessories and spare parts.
•
Do not use the device in the vicinity of highly flammable materials or in areas with
an explosion risk.
•
Unauthorized software installation in the device is not permitted.
2.3 ELECTRICAL SAFETY
•
To avoid the risk of electric shocks, this equipment must only be connected to
supply mains with protective ground.
•
The device has an onboard power supply unit installed. For connection to the mains,
use only the manufacturer-approved cables provided with the device.
•
Before performing maintenance on the device, turn it off and disconnect the power
cable.
7
