Baureihe
2 625 01
2 625 02
2 625 02 i
Service Manual
SOLO
KLEINMOTOREN
GMBH
edition 4 dated 26.02.2018
Seite 17
The status window shows the status of the sensors, the injection time and the ignition
angle during engine operation.
Check the following indications:
No. Of rev. errors:
If the number of rev. Errors increases during starting or engine operation, a failure of
the speed sensor can be indicated. Check sensor and wires.
Throttle potentiometer
In idle position the value should be around 10 degrees and during full throttle 90
degrees. With other readings the sensor is defect.
Engine temperature
Check the engine temperature with a second gauge if it is plausible.
Air temperature
Check the air temperature with a second gauge if it is plausible.
Air pressure (int.)
This value can be checked with an altimeter.
Other sensors are not connected.
