16
582 ROTAX ENGINE
1. Check the engine bolts and rubbers for security and wear.
2.
Check engine mount cradle as well as bolts and nuts.
3.
Check fuel system. From tank to filter to carburettor. Check all tubes for wear, leaks and
to make sure they are secure.
4. Check tank for water and contamination.
Do not rely on filters.
5.
Check fuel valve and breather are clear and open.
6. Check the complete electrical system, loose connections, worn wires and loose spark
plugs.
7.
Systematically check and feel all bolts and nuts for security and corrosion.
8. Check the propeller for general condition, dents and dings, also ensure all 6 propeller
bolts are properly secured with lock nuts.
9. Check the complete exhaust system, attachment bolts, springs, exhaust gaskets
(for leaks) and make sure springs are wired.
10. Check carburettors are secure by moving them up and down on their mounting rubbers.
Check carburettor rubbers for perishing and cracks.
11. Check radiator and all the mounting points, also check hoses for security, wear and tear.
NOW YOU ARE READY TO GO!!
But first do your Operation Check List
ENGINE START
-
Before allowing your passenger into the rear seat it is advisable to first warm up the
engine. Look around to ensure there are no onlookers, children, animals near to the
propeller.
-
Chock the rear and front wheels.
-
Apply full choke.
-
Make sure the throttle is properly closed.
-
Switch both ignition switches on
-
Loudly shout “prop clear”
-
Turn the ignition key.
-
Close the choke as the throttle is gently opened.
-
Check the operation of both ignition switches. At 3000rpm the engine should not loose
more than 300rpm when one ignition is switched off.
-
Warm the engine up for until the oil temperature is at least 50 degree celsius.
Содержание Aquilla 582
Страница 1: ...1 Aquilla 582 Manual ...
Страница 2: ...2 RECORD OF OWNERSHIP DATE NEW OWNERS NAME ...