Solmeta Pro2-EOS, Руководство пользователя

Страница: 19 / 28

R
15
Compass calibration
IMPORTANT:
time you move the device and camera more than 100 miles or are using different cameras. Also,
calibrate the compass if the direction shown as you shoot seems incorrect.
The compass calibration can be performed via Pro2–EOS receiver custom setting or via camera setting. Before using the receiver, you must calibrate the compass. Repeat this procedure each
3) Press the [ button repeatedly to access the . MENU] Custom Settings <CAL>
2.Perform the calibrating as described below
1)Hold the camera and the Pro2-EOS receiver
in your hand, rotate both devices slowly around the X-axis, Y-axis, and Z-axis. Do the rotation twice
in each axis.
Try to do the rotation as a constant speed. Each rotation takes about 5-10 seconds.
2)After doing the rotation in each of the three-axis, press the
button again to finish the
calibration.
[ENTER]
Calibrating the compass via Pro2-EOS receiver custom setting
1.Enable the compass calibration
MENU] Main Display
1) With the data cable connected, mount the receiver on the camera’s hot shoe, then turn the receiver
and the camera on.
2) Press the [
button to access the setting <SET ?> flashing on the LCD
4)Press the button again until the LCD shows the following screen: [ENTER]
Pro2-EOS